Tube welding mill HF, 1995 model
Technical data:
Outer diameter, max. 2.00\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" (50 mm)
Outer diameter, min. 0.50\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" (12 mm)
Wall thickness, max.(at 79000 PSI tensile strength) 0.063\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" (1,6 mm)
Wall thickness, min.(at 79000 PSI tensile strength) 0.024\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" (0,6 mm)
Center to center distance (horizontal center distance) 12.99\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" (330 mm)
Shaft diameter 1,57\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" (40 mm)
Roll space 10.62\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" (270 mm)
Gear Ratio (lower to upper shafts)
Pass 1-4 1.4 : 1
Pass 5-9 1 : 1
Number of driven passes: 9
Maximum line speed, with one cut-off unit 360 fpm (110 m/min)
Maximum line speed, with (4) cut-off units 310 fpm ( 94 m/min)

Scope of supply:
-strip entry line
-Tube Mill RS 100.09 HF
-Set of roll tools for size 1,125\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" x 0,035\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
-HF-generator
-AEG high frequency induction welder
-Emulsion cooling unit
-Flying cut-off machine Tk636ED160
-4 cut-off units
-Safety devices
-Electrical line control

General information:
Price : upon demand
Year of manufacturing 1995
Length of installation approx. 21 m